Punch press equipment is a very common mechanical device with certain dangers. It is easy to press your hand if you are not careful. During the use process, it is necessary to install a special safety light curtain for punch presses for protection. This can not only ensure the safe production of the equipment and protect the personal safety of the operators, but also will not affect the work efficiency.

For a safety light curtain dedicated to punch presses to achieve the effect of safe use, what specific parameter requirements should it meet?

The safety light curtains specially designed for punch presses are basically of the through-beam type, installed on both sides of the punch press. Invisible infrared rays are generated in the middle. As long as the light is blocked by human hands, the machine will stop and descend in an emergency. They are easy to install and use, and take up little space. Generally, the safety light curtains dedicated to punch presses need to protect the palms and arms. The protection height and length should be determined based on the size of the punch press table. It is necessary to first determine whether the punch press is of the old type and whether it has been modified, and confirm the tonnage of the punch press to determine the protection height of the safety light curtains to be installed. Then, the wiring method and output method should also be determined according to the specific requirements of the equipment. Special safety light curtains for punch presses must achieve shockproof effects, especially on large punch presses, where shockproof is extremely important!

The performance of the Rihuan safety light curtain is stable and can rival that of imported brands.